Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
tutorials:aerohive:openwrt-on-ap121 [2024/03/02 21:57] – Zyzonixtutorials:aerohive:openwrt-on-ap121 [2024/03/02 21:58] (current) – Zyzonix
Line 94: Line 94:
   - Finally power on the injector.    - Finally power on the injector. 
   - You should now see the boot process of the AP. Interrupt it by hitting any key. When getting asked for a password either try ''AhNf?d@ta06'' or ''administrator''. Here to copy:<code bash>AhNf?d@ta06</code>   - You should now see the boot process of the AP. Interrupt it by hitting any key. When getting asked for a password either try ''AhNf?d@ta06'' or ''administrator''. Here to copy:<code bash>AhNf?d@ta06</code>
-  - Then verify the firmware version again with, if it prints something higher like ''1.0.0.25'' everything is ok: <code bash>version</code>+  - Then verify the firmware version again with, if it prints something higher as ''v1.0.0.25'' everything is ok: <code bash>version</code>
   - After that transfer the firmware file, replace ''<name-of-firmware-image>'' with ''openwrt.bin'' or the name you gave the firmware file:<code bash>tftpboot 0x81000000 <name-of-firmware-image></code>   - After that transfer the firmware file, replace ''<name-of-firmware-image>'' with ''openwrt.bin'' or the name you gave the firmware file:<code bash>tftpboot 0x81000000 <name-of-firmware-image></code>
   - If using PumpkinTFTP and the TFTP-client on the AP can find the image on the server, a pop-up will appear. Accept the transfer and the firmware will be transferred.    - If using PumpkinTFTP and the TFTP-client on the AP can find the image on the server, a pop-up will appear. Accept the transfer and the firmware will be transferred. 
  • tutorials/aerohive/openwrt-on-ap121.txt
  • Last modified: 2024/03/02 21:58
  • by Zyzonix