Rustdesk headless-installation Linux [Fixes

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.

====== Rustdesk headless-installation Linux======

<WRAP center todo>
Currently outdated, will be updated soon.
</WRAP>

First install Rustdesk from ''repo.zyzonix.net''.
Then configure Rustdesk (if using different relay server than the default) via the default GPU.

Install ''xorg-xserver-video-dummy'':
<code bash>sudo apt install xserver-xorg-video-dummy</code>

Apply the following configuration for full-HD:
Therefore edit:
<code bash>sudo nano /usr/share/X11/xorg.conf.d/xorg.conf</code>
And paste this content:
<code bash>
Section "Monitor"
  Identifier "Monitor0"
  HorizSync 28.0-80.0
  VertRefresh 48.0-75.0
  # https://arachnoid.com/modelines/
  # 1920x1080 @ 60.00 Hz (GTF) hsync: 67.08 kHz; pclk: 172.80 MHz
  Modeline "1920x1080_60.00" 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -HSync +Vsync
EndSection
Section "Device"
  Identifier "Card0"
  Driver "dummy"
  VideoRam 256000
EndSection
Section "Screen"
  DefaultDepth 24
  Identifier "Screen0"
  Device "Card0"
  Monitor "Monitor0"
  SubSection "Display"
    Depth 24
    Modes "1920x1080_60.00"
  EndSubSection
EndSection
</code>

Finally restart the VM.

//Tested on Proxmox VM//
//Partially sourced from: [[https://techoverflow.net/2019/02/23/how-to-run-x-server-using-xserver-xorg-video-dummy-driver-on-ubuntu/|techoverflow.net - xserver-xorg-video-dummy-driver]]//